Error Code Database
Panasonic Alarm 16.0
Over-Load Protection
Possible Causes
1. Load is too heavy (exceeded rated torque for too long).
2. Mechanical brake is not released.
3. Wiring issue (motor phases U, V, W connected wrongly).
4. Gain tuning is poor, causing oscillation.
Recommended Solution
- Check torque monitor; reduce load or acceleration/deceleration rate.
- Verify mechanical brake release timing.
- Correct motor wiring.
- Perform auto-tuning or manual gain adjustment.
Still seeing Error 16.0?
If the troubleshooting steps above didn't resolve the issue, your Panasonic hardware likely has a component failure.
Fast Turnaround • 3-12 Month Warranty